联系人：李威<先生>有需要电话联系13725838534
手机：13725838534 地址：广东省东莞市塘厦镇振兴围东兴大道76号
手机：13538338546 在线QQ：778918362(回收仪器价格高同行15%)
提示：如果您找不到联系方式，请在浏览器上搜索一下：承泰电子仪器李威
本公司主要供应回收 ：频谱分析仪，信号发生器，电桥，电源，示波器，网络分析仪，综合测试仪，万用表等世界著名品牌产品。
泰克 TCP0150 交/直流电流探头
Tektronix TCP0150 交/直流电流探头|泰克|示波器探头|TCP0150
品牌:美国泰克 Tektronix
产品特点
* 容易进行高精度AC/DC电流测量，操作简便，直流电流精度典型值≤1%；
* 带宽DC~20MHz，电流从±5mA到150A有效值，可满足大电流和小电流测试需要；
* 具有自动匹配刻度单元，并在示波器显示屏上读出；
* 在ATE设备通过GPIB接口可进行远程编程；
* 容易退磁和自动归零。
* 适用示波器型号：DPO4032、DPO4034、DPO4054、DPO4104
* MSO4032、MSO4034、MSO4054、MSO4104
* 部分DPO7000系列示波器。
* 容易进行高精度AC/DC电流测量，操作简便，直流电流精度典型值≤1%；
* 带宽DC~20MHz，电流从±5mA到150A有效值，可满足大电流和小电流测试需要；
* 具有自动匹配刻度单元，并在示波器显示屏上读出；
* 在ATE设备通过GPIB接口可进行远程编程；
* 容易退磁和自动归零。
* 适用示波器型号：DPO4032、DPO4034、DPO4054、DPO4104
* MSO4032、MSO4034、MSO4054、MSO4104
* 部分DPO7000系列示波器。
Features & Benefits
Easy to Use and Accurate AC/DC Current Measurements
Connects Directly to DPO4000, MSO4000 and DPO7000 Series Oscilloscopes Using the TekVPI Probe Interface
DC to 20 MHz Bandwidth
150 A RMS Maximum Current Capability
500 A Peak Pulse Current Capability
High Accuracy with Typically Less than 1% DC Gain Error
Accurately Measures Current levels as low as 5 mA
Low Noise and DC Drift
Provides Automatic Units Scaling and Readout on the Oscilloscope's Display
Remote Programmable GPIB Control for ATE systems
Split-Core Probe Head Construction Allows Easy Connection to Conductors
Easy to Degauss and Autozero
Setup Controls and Probe Status and Diagnostic Indicators are Provided on Both the Probe Hardware and via an Easy-to-Access Scope UI Display Menu
Connects Directly to DPO4000, MSO4000 and DPO7000 Series Oscilloscopes Using the TekVPI Probe Interface
DC to 20 MHz Bandwidth
150 A RMS Maximum Current Capability
500 A Peak Pulse Current Capability
High Accuracy with Typically Less than 1% DC Gain Error
Accurately Measures Current levels as low as 5 mA
Low Noise and DC Drift
Provides Automatic Units Scaling and Readout on the Oscilloscope's Display
Remote Programmable GPIB Control for ATE systems
Split-Core Probe Head Construction Allows Easy Connection to Conductors
Easy to Degauss and Autozero
Setup Controls and Probe Status and Diagnostic Indicators are Provided on Both the Probe Hardware and via an Easy-to-Access Scope UI Display Menu
Applications
Power Supplies
Semiconductor Devices
Power Inverters/Converters
Electronic Ballasts
Industrial/Consumer Electronics
Motor Drives
Transportation Systems
Semiconductor Devices
Power Inverters/Converters
Electronic Ballasts
Industrial/Consumer Electronics
Motor Drives
Transportation Systems
Note: Requires DPO7000Series Firmware Version 3.0.2 or greater. Requires DPO4000/MSO4000 Firmware Version 2.06 or greater.
TCP0150 is a high performance and easy-to-use 150 A AC/DC current probe designed for use and direct connection (without the need of an additional power supply) to the TekVPI™ probe interface used on Tektronix DPO4000, MSO4000 and DPO7000 Series oscilloscopes. This AC/DC current measurement probe provides 20 MHz of frequency bandwidth with selectable range control for 25 A and 150 A measurement ranges. It also provides low current measurement capability and accuracy to current levels as low as 5 mA per division — important for achieving broad dynamic current range of high-level and low-level measurement signals.
